F9 Double Eagle (DE) was developed as a safe-to-use, concentrated multi-purpose degreaser and general cleaner. Additionally F9 DE is an excellent neutralizer for acidic stains like sulfuric acid from Golf Cart batteries and automobiles. Use also to neutralize F9 BARC or F9 Efflo if needed. Double Eagle serves two purposes when cleaning oil stains in combination with rust or battery acid; it cleans the oil and concrete plus neutralizes the battery acid. After that it’s just a matter of a surface cleaning and you’ve performed two tasks with minimal effort!
Cut through your oily surfaces quickly and save time on your jobs with less dwell time. You’ll love how well this product works!
For use on: Oil, Hydrocarbon, Food Stains, Tire-marks, General Surface Accumulations. Do not use on Asphalt.
DILUTION RATIOS
Very Heavily Soiled Surfaces: Straight
Heavily Soiled Surfaces: 1:1 to 5:1
Moderately Soiled Surfaces: 10:1
Lightly Soiled Surfaces: 20:1
CLEANING INSTRUCTIONS
For use on Concrete, Bricks, Pavers, Tile, Stone, Grout, Masonry, Hard Surfaces, and most surfaces in general. Great for food grease, oils, dumpster pads, loading docks, gas stations, parking garages, tire marks and general cleaning of many surfaces.
Direct Application: Pump Sprayer, Electric or Air Diaphragm Spray System.
Dilution will depend on how dirty the area is. Product may be diluted 5:1 to 20:1. Spray on, dwell 2-15 minutes. Manually agitate heavy areas or use floor tool. Surface clean after. Hot water preferred, cold water OK.
Downstream Application: Use a downstream injection system capable of giving you the correct dilution rate for the circumstances. Spray on, dwell 2-15 minutes. Manually agitate heavy areas or use floor tool. Surface clean after. Hot water preferred, cold water OK.
X-Jet Application: Dilute product to give you the correct dilution rate for the circumstances. Spray on, dwell 2-15 minutes. Manually agitate heavy areas or use floor tool. Surface clean after. Hot water preferred, cold water OK.
Note: If areas are extremely soiled, use a 175 floor tool with extra-aggressive mal-grit to agitate.
HOW TO USE AS A NEUTRALIZER
General Neutralizing: 8:1. Spray on surface to be neutralized. Broom in if necessary. Rinse or surface clean. Make stronger to bring final pH of discharge up. Make weaker if you need to adjust final pH down. Always check wastewater to make sure final discharge pH is correct for City BMP’s.
