4 Port Clear Vision Soft Washing Chemical Manifold  The clear material enable confirmation of product flow and helps with troubleshooting and locating leaks. Choose between (3/4", 1/2", 3/4", 1/2") with 3/4" through hole, 3/4" end ports OR (1", 1/2", 1", 1/2") with 1" through hole, 1" end ports Two top mounting holes allow for secure mounting to our plate or other surfaces. 5 year warranty ** OCS RECOMMENDS TEFLON TAPE OR WHITE PTFE THREAD SEALANT ON CLEARVIEW MANIFOLDS. DO NOT OVER TIGHTEN. THERE IS NO WARRANTY OR RETURNS ON CRACKED MANIFOLDS.**

Read more less

Check Valves For Corrosive Chemicals   Choose Your Size

Read more less

Chemical Resistant Poly Plug. These are great for plugging the ports that aren’t being used on chemical metering manifolds, etc. 

Read more less

Remote Rinse Module This module is specifically designed to work with all soft wash pumps (even high gpm gas pumps like the Comet P40 and AR45) and proportioning, metering and blend units. Eliminates going back to the truck to turn off soap and switch to rinse or flush. Long distance range, simple on/off remote, chemical resistant and weatherproof components.  Unit comes standard with 1/4" hose barbs for soap line and choice of 1/2", 3/4"  or 1" hose barbs for water, bleach and bleach valve connection.  Two pre-programmed remotes w/battery and 10' power cord with waterproof on/off switch to disconnect power when not in use. Simply connect to a 12 volt battery, make hose connections and start saving time & money!  

Read more less

Chlorine Rated Asahi Metering Valve For Soft Washing Proportioner    1/2” , 3/4”, & 1” Options    PVC body True union design Equal percentage flow characteristics Precision machined flow control ball and seat design SST - Seat Support Technology Degreed indicator plate (manual type) Indicator line on handle (manual type) Flow direction arrow label Dual stem O-rings      

Read more less

Slotted PVC Filter   Sodium Hypochlorite safe. Finely slotted, tremendous flow   For use with air diaphragm, 12 volt and gas powered soft wash pumps     CHOOSE YOUR SIZE    

Read more less

Soft Wash Metering System With Premium Asahi Metering Valves & Clear Manifold Choose 3 or 4 Port Manifolds With Either 3/4” Water & Bleach Ports & Your Choice of 1” or 3/4” Water & Bleach Valves. Soap Ports Are Always 1/2” With a 1/4” Filter This Soft Washing Proportioner System Comes With: Asahi Metering Valve For Water (Choose Size) Asahi Metering Valve For Bleach (Choose Size) Banjo 3 Way Flush Valve With Stainless Brackets To Flush Bleach Line Choose One or Two Asahi 1/4” Metering Soap Valves Clear View Manifold  Poly Check Valves With FKM Seals & Hastelloy Springs Barbed Fittings To Match Valve Sizes (3/4” or 1”) Order An Extra 90 Degree Male Thread To Barb Fitting For Gas Powered Pumps That Require Bypass Unless You Choose The Plumbing Kit Option & Then It’ll Come With That Barb & Everything Else Needed To Plumb A Gas / Bypass System.  Choose Assembled Metering System or DIY Kit  Optional Suction Hose, Filter, Stainless Clamps and Uniseal Plumbing Kit. This is everything you will need to plumb the system to your water, bleach and soap tanks. You will simply drill a hole into the top of your tanks to fit the rubber uniseal gasket, slide the hose through, and then place the filter on the end of the  hoses so they sit at the bottom of your tanks.  Unlike many chemical proportioning systems out there , absolutely no corners are cut on this professional grade soft wash metering system. This was designed for professional cleaners by professional cleaners. Call us or chat if you have any questions about what’s recommended for your specific set up.    *** NO RETURNS OR WARRANTY ON THESE METERING SYSTEMS. IF WE ASSEMBLE IT, IT WILL BE WATER TESTED BY US BEFORE SHIPPING.*** BE CAREFUL NOT TO OVER TIGHTEN THESE POLY FITTINGS IF YOU CHOOSE THE DIY KIT. FEMALE PORTS ON THE MANIFOLD AND CHECK VALVES WILL CRACK IF YOU TIGHTEN THEM TOO MUCH.    

Read more less

DS PRO comes assembled with a polypropylene block with 1/4" inlet ports, pvc check valves with stainless steel balls and viton™️ seals, and Asahi labcock metering valves. No more mixing soap into your chem tank. Separate and meter your soaps through a single downstream injector! Block is made from black polypropylene, etched label, and drilled and tapped by to 1/4”. Choose 2 or 3 ports    

Read more less

(1) Replacement Remote for Rinse Module & Downstream Remote *includes battery

Read more less

Control Panel: VDST Bleach Valve: 1/2 inch Metering Valve Soap Valve: (3) 3/8 inch Metering Valve Manifold: 4 port

Read more less

Hayward PROPORTIONAL Flow CONTROL BALL VALVES-These are the valves used in our Hydro-Mixer XL and XXL metering systems-Select size and water, SH or soap decal-valves come with female threaded ends

Read more less

This bleach rated chemical metering valve is great for 12 volt pumps, booster pumps, medium flow air diaphragm pumps. DOS/SM Series Metering Valve Chemical resistant materials, seats and seals FNPT x FNPT threaded ends Available in 1/2", 3/4" and 1" sizes 180 degree handle turn

Read more less

Downstream V3 ClearView Manifold *3 product selector for downstream injectors *Simple plug n play setup. Connect the outlet to your downstream injector *quickly change between 3 different products or blend multiple products together *Micro shut off valves with FKM seals allow for adjustment of flow (not full metering) *Built in check valves with titanium springs for bleach and chemical resistance *ClearView manifold to visually confirm product and location of air leaks *securely mounted to our 15.5" wide HD aluminum plate *Made in USA

Read more less

Remote Downstream Module with soap metering, no mixing soap in with bleach. This module pulls straight SH and has a soap metering valve so you don't have to mix soap with SH.  Eliminates going back to the truck or trailer to shut off your downstream. Also gives you the capability to run low pressure without soap.  Great range, simple on/off operation, weatherproof, corrosion, chemical resistant components.  All electrical components are housed in a weatherproof box away from valves and chemicals. Unit comes standard with 1/4" hose barbs. Two pre-programmed remotes included with 10' weatherproof power supply cord with waterproof on/off switch to disconnect the power when not in use.  Simply connect to a 12 volt battery, make hose connections and start saving time & money!   *unit ships with soap and SH check valves loose to prevent shipping damage.  

Read more less

(1) Replacement Remote for Rinse Module & Downstream Remote *includes battery

Read more less

Remote Downstream Module This module is identical to our Remote Smart Rinse for soft wash, but no soap shutoff valve. Eliminates going back to the truck or trailer to shut off your downstream. Also gives you the capability to run low pressure without soap.  Great range, simple on/off operation, weatherproof, corrosion, chemical resistant components.  All electrical components are housed in a weatherproof box away from valves and chemicals. Unit comes standard with 1/4" hose.  Two pre-programmed remotes included with 10' weatherproof power supply cord with waterproof on/off switch to disconnect the power when not in use.  Simply connect to a 12 volt battery, make hose connections and start saving time & money!  

Read more less

MAX-GPM Remote Bypass for Downstreaming (shown with optional injector) *simple plug n play configuration *save time by remotely switching between wash & rinse *bypass allows for maximum gpm with 8+ gpm pressure washers *modular design fits our stands *comes with 2 remotes, 10' power cord with waterproof power switch *indicator light has 10' cord for remote mounting *3/8" quick connect fittings for pressure in and out as well as injector installation

Read more less

On Demand Pumps. Now available with our ClearView Manifold for increased visual confirmation of product flow and ease of troubleshooting. **only use teflon tape with ClearView Manifolds** Solid one piece polypropylene manifold, 4 inlet ports and 2 outlet ports. This chemical proportioner system is mounted to an aluminum plate with 6 mounting holes. No more batch mixing! Our chemical metering manifold eliminates batch mixing and guess work of solution concentration. Standard setup is two metering valves for water and bleach (SH), one soap metering valve (surfactant).  Optional 2nd soap valve port available. See in options. No stress on your pump with our 3/4" and 1" metering valves, whether it's a dual 12 volt, 24 volt, electric booster or air operated.  Fully assembled and tested.  All components designed for long life and ease of service.  All components used are chemical resistant. 

Read more less

Now available with our ClearView Manifold for increased visual confirmation of product flow and ease of troubleshooting  Updated & Improved Hydro-Mixer XL Proportioning System **WE RECOMMEND TEFLON TAPE OR WHITE PTFE THREAD SEALANT ON CLEARVIEW MANIFOLDS.  NOT TRU-BLU THREAD SEALANT** -XL comes standard with (1) water, (1) soap and (1) chem/SH metering valve.  Select 2nd soap metering valve in options to add 2nd soap valve. For optimum performance, reliability, accuracy & consistency **standard connections are 3/4" water & chem, 1/4" soap**P40-inlet 1", 1/2" bypass, AR45 inlet 1 1/4", 3/4" bypass** -Standard is mounted to aluminum plate.   -Built for high gpm gas powered pumps like the Comet P36/P40 or AR45 or compressor driven air pumps 10+ GPM -Special high flow metering valves (made in the USA) designed to give you full performance and no restriction on the pump even when running low SH %.  -Bypass setup for gas pumps included allowing you to run in bypass with the solution recirculating for approx. 5-10 minutes max.  -Add 2nd soap/surfactant metering valve to run 2 products simultaneously or eliminate moving your soap line between tanks. Run a surfactant and degreaser or neutralizer/rinse aid. -Valve indicator to know what % you're running at and ease of operation. -Identical water and SH valves deliver consistent and accurate ratios day in and day out. -Precision soap metering valves allow for fine tuning and adjustments right where you need them. No more frustrations of having too much or too little and not being able to get it just right. -All components are designed with chemical resistance in mind, ease of maintenance and service and long life of the complete system.

Read more less

GF Metering Ball Valve **Choose Size** The PVC Metering Ball Valve offers a dependable alternative to traditional rotary ball valves. This valve features a durable, lightweight body that resists corrosion and is easy to install. The ball is able to be rotated to control the flow. It features a PVC body and stem, a PVC ball, and a PTFE seat. It has a socket connection. The Metering Ball Valve is normally closed, and it is designed to control flow.   PRODUCT DESCRIPTION Metering ball valves give you precise control over the entire 180°> range. True union design lets you remove wetted parts. Valves have EPDM body seals and seats. Less than 5 inch overall Length. Calibrated in 5°> increments. Best metering ball valve for pressure washing and soft washing trailers and skids.   TECHNICAL SPECS Item Metering Ball Valve   Body MaterialPVC   Pipe Size 3/8” or 1/2”   Connection TypeNPT x NPT   PortStandard   Max. Pressure150 psi   Ball MaterialPVC   Seat MaterialPTFE   Stem MaterialPVC   Body Seal MaterialEPDM   Valve StructureBall  

Read more less